Maestro M100 2G Manual do Utilizador descarregar pdf (Página 56)

Confidential, the whole present document is the sole property of Maestro Wireless Solution Ltd.

15 MODEM STATUS CHECK AND MONITORING

The Modem Status Check and Monitoring feature makes the modem can check the status of the modem in either “one

shot” or periodic (per minute) mode. Modem will also report check result by SMS if result is beyond preset limit, and reset

automatically if losing network connection.

Following items will be checked:

- network registration (periodic mode only, triggering reset)

- rom test

- signal strength (can trigger reporting)

- IP address of modem (only when GPRS connection activated)

- module battery voltage (can trigger reporting)

15.1 AT command for Modem Status Check and Monitoring

15.1.1 AT+TMODE command

This command is to perform and setup modem status check and monitoring feature

Command Syntax:

AT+TMODE (=<mode>(,<para>))

Response syntax:

+TMODE: <test1>,<test2>….

Command

Possible responses:

AT+TMODE

+TMODE: 1, 15, “10.111.222.33”, 3814

Note : execute status check (“one shot” mode)

AT+TMODE=?

+TMODE: (0-4), (15)

Note : possible argument

AT+TMODE?

+TMODE: 1, 1234567, 10, 3500

Note: display current setting

AT+TMODE=0

Note: disable periodic mode check

AT+TMODE=1

Note: enable periodic mode check

AT+TMODE=2,”1234567”

Note: set telephone number for periodic mode reporting

AT+TMODE=3,10

Note: set network signal trigger level for remote reporting

AT+TMODE=4,3450

Note: set input voltage trigger level for remote reporting

Defined Values :

<mode>

0 disable periodic mode check

1 enable periodic mode check

2 to set the number in <para> field as telephone number for periodic mode check reporting. See section 15.1.2for

details

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 86 87

Comentários a estes Manuais

Sem comentários

Maestro M100 2G Manual do Utilizador Página 56

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Maestro M100 2G