Maestro M100 2G Manual do Utilizador Página 16

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 87
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 15
Confidential, the whole present document is the sole property of Maestro Wireless Solution Ltd.
14
3 specify the TTL value of the socket connection to <parameter>. The value can be set from 1 to 255.
default value is 64.
4 specify weather to use ping function to check Internet connectivity:
<parameter> is the period in second of calling ping function after GPRS connected (+IPCONNECT: 1,1)
<action> is to specify the action will be taken if a set of ping action fail :
0: do nothing (default)
1: disconnect GPRS (+IPCONNECT=1,0)
2: reset Maestro
5 specify a set data to be send over the TCP/UDP connection to remote peer when it is just made. This can be used
as a identifier to the remote party.
<conn_str> is data to be sent when connection is just established. Data is entered in hexadecimal format (01 to FF).
Maximum 60 bytes can be set.
Note :
- Before enabling periodic ping action (+IPOPT=4,1,) be sure to setup Ping parameters properly. See Chapter 6 for
details.
- Periodic ping action is enabled with GPRS disconnection (+IPOPT:4,x,1) then Automatic TCP/UDP connection
should be also enabled, so that those functions will try to re-connect GPRS after disconnection caused by ping fail.
- Period of ping action should be set larger than the maximum time of one set of ping action.
Vista de página 15
1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 86 87

Comentários a estes Manuais

Sem comentários