Maestro 100 Manual do Utilizador descarregar pdf (Página 10)

www.dayTelecom.com

4. Connect the modem to external device

You can use the optional 'Y' cable to connect the modem's Sub-D connector to

external controller/computer. Note: The modem CANNOT be directly connected to

the 'LINE' jack of a landline telephone.

Connection example using optional 'Y' cable:

4p4c

plug

Handset of phone

Maestro

Sub-D 15 pin

DB-9

connector

100

RS-232 port of PC

5. Connect the DC power supply

Connect the open ending of the inducted power cord to a DC supply. Refer to the

following for power supply requirement.

Input voltage range

5V – 32V

Rated current

650 mA

AC-DC Adaptor

or battery (Not

included)

Solder wire

endings

Connect the connector to the modem. The modem will turn on automatically.

The status indicator on the modem will be lit when power on. After a few seconds it

will go flashing slowly (registered to the network successfully refer 1.2.1).

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Sem comentários

Maestro 100 Manual do Utilizador Página 10